user manual

181. Here is the intercooler pump and its
mounting hardware. Note that the (2)
larger 8mm nuts will be used to mount
the bracket and pump to the vehicle.
180. Note how the threaded ends of the
new bolts protrude from the back of the
bumper structure. This is where the
intercooler pump and bracket will mount.
New Bolts
182. Attach the intercooler pump to the
bracket as shown using Adel clamps
shown using the 6 x 16mm bolts and
nuts supplied. Tighten the bolts securely
using a 10mm wrench.
183. Here is the intercooler bracket and
pump-mounted in position on the
exposed ends of the (2) new bumper
bolts previously installed. Use the (2)
8mm nuts shown in the previous step to
mount the bracket to the bumper bolts.
Tighten the nuts securely using a 12mm
wrench.
9/07
Page 48
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com