user manual

Carefully Remove
These Fasteners Bolts
Fastener
177. Remove the (4) bumper fasteners by
carefully prying the padding away from
the bumper using a wide fl at blade
screwdriver or gasket scraper and then
pulling the plastic fastener free.
176. Carefully remove the bumper front
padding by removing the (4) plastic
fasteners.
Pry gently!
179. Replace the (2) original bumper bolts
with the new, longer bolts and washers
supplied. Torque the bolts to 45 ft-lbs
(61 Nm) using a 14mm socket and
torque wrench.
Original
Bolt
New Bolt
And Washer
Remove These Bolts
178. On the passenger side of the vehicle,
remove the inner (2) bumper mounting
bolts using a 14mm socket wrench.
9/07
Page 47
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com