user manual

157. Using the original mounting nuts,
mount the horns onto the new horn
bracket supplied as shown. Tighten the
mounting nuts securely using a 10mm
wrench.
156. Squeeze the trigger on the electrical
connector to remove it from the horns.
Next, remove the horn from the original
mounting bracket using a 10mm wrench.
2-3/4”
7/8”
3”
159. Install the horn-mounting bracket onto
the frame using the (2) self-tapping bolts
supplied installed into the new holes.
Tighten the bolts securely using a 10mm
socket wrench.
158. On the outside of the right (passenger
side) frame rail, directly behind the
bumper structure, make (2) 3/16” holes
using a drill in the locations shown.
Remove Nuts
9/07
Page 42
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com