user manual

135. Install the fi ttings removed in the last
step into the remaining length of the 3/8”
hose supplied.
134. Remove the fi ttings from the end of the
passenger side PCV line.
133. Connect the EVAP hose to the upper
barb located on the driver side of the
inlet manifold as shown.
EVAP
Hose
132. Locate the EVAP hose previously
removed. Connect the hose to the
upper barb on the supercharger inlet
manifold.
9/07
Page 36
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com