user manual

122. Using a shop knife cut the plastic tubing
on the original PCV lines to free the
plastic end fi ttings.
121. With the air tube assembly installed,
carefully tighten all (4) hose clamps.
Note: The PCV barb.
120. Install the air tube assembly by sliding
the round hose onto the air box cover
connection fi rst, then working the oval
hose onto the throttle body.
PCV Barb
123. Remove the brake vacuum hose where
it meets the check valve on the brake
booster. This hose, the “T” fi tting and
small hose connected to it will no longer
be used.
Check Valve
9/07
Page 33
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com