user manual

119. Install the hose and clamps onto the
air tube as shown. Do not tighten the
clamps completely at this time.
116. Remove the clamp from the end of the
air tube. Use a sharp knife or razor
blade to cut the rubber of the air tube to
free the vapor element.
118. Install the vapor element into the end
of the new air tube as far as it will go.
Next, slide the new “hump” hose over
the element and onto the air tube.
117. Carefully remove the vapor element from
the air tube.
Vapor Element
9/07
Page 32
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com