user manual

Release Trigger
1. Relieve the pressure in the fuel tank by
removing the cap and re-installing it.
IMPORTANT! Ensure vehicle has
91 or higher-octane fuel in it prior to
supercharger installation!
2. Disconnect the negative (-) battery
clamp using a 7mm wrench.
3. Remove the Positive Crankcase
Ventilation (PCV) line from the air tube
by pressing the release trigger in the
connector and pulling it free. Follow the
line to its connection on the cam cover
and remove the line completely from the
motor.
4. Loosen the air tube clamp at the throttle
body using a 8mm nut driver or straight
blade screwdriver.
9/07
Page 3
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com