user manual

76. Install the fuel manifold on to the driver
side fuel rail using supplied O-ring and
bolts. Torque the fuel manifold bolts to
106 in-lbs (12Nm) using a torque wrench
and 10mm socket. Be careful not to
pinch the O-ring.
75. Using a small amount of the grease
supplied, lubricate the fuel manifold O-
ring and install it into the recess on the
driver side fuel rail.
73. Carefully remove the (8) intake manifold
gaskets from around the port openings
on the bottom of the intake manifold.
74. Clean and inspect the manifold gaskets
removed from the original intake
manifold. Install the gaskets onto the
supercharger manifold. Note, the “tab”
on the gasket and how it fi ts in the
slot provided for it. Ensure that all (8)
gaskets are installed correctly
Gaskets
Tab
Gasket
9/07
Page 21
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com