user manual

70. Carefully remove the throttle body
gasket from the intake manifold.
69. Install the two-throttle body-mounting
studs removed in the previous
step into the lower (2) holes on the
supercharger inlet fl ange. Double-nut
the studs, tighten them securely into the
supercharger inlet fl ange and remove
the nuts.
Double-Nutted Stud
71. Install the throttle body gasket into the
groove in the inlet manifold fl ange.
Gasket
72. Install the throttle body onto the inlet
manifold with the TPS on the passenger
(right) side using the original bolts.
Tighten the (2) bolts and (2) nuts using 8
&10mm sockets and torque them to 106
in-lbs (12Nm).
9/07
Page 20
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com