user manual

INSTALLATION MANUAL
Magna Charger
FORD 4.8 Liter 3V Engine,
2005-2007 MUSTANG
Please take a few moments to review this manual thoroughly before you begin work:
A quick parts check to make certain your kit is complete (See shipper parts list in this package). If you discover shipping
damage or shortage, please call our offi ce immediately. Take a look at exactly what you are going to need in terms of
tools, time, and experience. Review our limited warranty with care. When unpacking the supercharger kit DO NOT lift
the supercharger assembly by the black plastic bypass actuator. This is pre-set from the factory and can be altered if
used as a lifting point!
Caution: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fi re
and personal injury. After relieving the system pressure, a small amount of fuel may be released when servicing the fuel
lines or connections. In order to reduce the risk of personal injury, cover the regulator and fuel line fi ttings with a shop
towel before disconnecting. This will catch any fuel that may leak out. Place the towel in an approved container when
the job is complete.
Use only premium fuel, 91 octane or better.
Magna Charger systems are manufactured to produce about 20 RWHP per pound of boost at sea level. High altitudes
will produce different numbers.
Our Magna Charger kits are designed for engines in good mechanical condition only. Installation on high mileage or
damaged engines is not recommended and may result in engine failure, for which we are not responsible. Magna Char-
ger is not responsible for the engine or consequential damages.
Aftermarket engine re-calibration devices that modify fuel and spark curve (including, but not limited to programmers)
are not recommended and may cause engine damage or failure. Use of non-Magna Charger approved programming
will void all warranties. If you have any questions, call us.
After you fi nish your installation and road test your vehicle, please fi ll out and mail in the limited warranty card, so we
can add you to our fi les (this is important for your protection).
• A new fuel fi lter is recommended at the time of supercharger installation.
• Stock application Motorcraft spark plugs are recommended
• Drive belt= Gates# K061247
• Air Filter= K&N# 33-2298
Tools Required:
Metric wrench set
¼” - 3/8” and ½” drive metric socket set (Standard & Deep)
3/8” and ½” drive Foot pound and inch pound torque wrenches
Phillips and fl at head screwdrivers
Fuel line quick disconnect tools (included in kit)
Small or angled 3/8” drill motor
Drain pan
Hose cutters
Hose clamp pliers
Safety glasses
Metric Allen socket set 3/8” drive
Electric drill and drill bits
Contact Information:
Magnuson Products Inc
Magna Charger Division
1990 Knoll Drive
Ventura, CA, 93003
Sale/Tech Support [phone]
Web site:
www.magnusonproducts.com
www.magnacharger.com
E-mail:
[e-mail]
9/07
Page 2
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com