user manual

63. Remove the (3) bolts that secure the belt
tensioner using a 10mm socket wrench
and remove the tensioner from the front
of the motor.
62. Install the (2) new alternator brackets
with the (4) original bolts. Torque them
to 106 in-lbs (12Nm) using a 8mm and
10mm sockets and a torque wrench.
Alternator
Brackets
61. Install the idler pulley with its spacer
into the remaining hole on the mounting
bracket with the bolt supplied. Torque
this bolt to 28 ft-lbs (38 Nm) using a
15mm socket and torque wrench.
64. Carefully place the tensioner in the soft
jaws of a vice. Using a hacksaw or a
small grinder, remove the center stop of
the tensioner.
Remove Stop As Shown
9/07
Page 18
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com