user manual

53. Install the hose connector supplied into
the ends of the hose. Note that the barb
on the connector will point rearwards,
towards the engine, away from the
radiator. Secure the connector in the
hose with the #18 clamps supplied but
leave them loose so fi nal adjustments
can be done on the vehicle.
54. Here is the completed hose with the
connector installed.
To Manifold
To Radiator
55. Re-install the water manifold. Torque
the fasteners to 89 in-lbs using a 10mm
socket and torque wrench.
56. Re-install both coolant hoses. Note, on
the passenger side hose, that the barb
on the connector will point rearwards
towards the engine, away from the
radiator. Secure the connector clamps
after the fi nal adjustments.
9/07
Page 16
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com