user manual

45. Place the coolant pipes in the soft jaws
of a vice. Separate the (2) coolant pipes
by cutting the connecting brackets using
a hack saw.
46. Use care when cutting, as the smaller
diameter pipe will be re-used.
47. Here are the coolant pipes separated,
and the smaller diameter pipe is now
ready for re-installation.
48. Re-install the smaller diameter coolant
pipe by fi rst carefully starting the end
on the engine block nipple. Secure the
coolant pipe with the bolt previously
removed. Re-connect the ECT and
EKS sensor connectors. Using some
of the ty-straps supplied, secure the
connectors to the coolant pipe and the
remaining portion of the connecting
bracket.
Cut Here
Engine Block Nipple
Engine Block Nipple
9/07
Page 14
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com