user manual

41. At the rear of the passenger side
cylinder head, locate the bolt that secure
the steel coolant pipes in place and
remove it using a 13mm socket wrench.
42. Pull the coolant pipes up so you can
remove the coolant hoses and clamps
using a pair of pliers.
43. After removing the coolant hoses, gently
lift the pipes up and back to remove
them from the engine. Some additional
engine coolant will be lost at this point,
place a suitable drain pan under the
transmission bellhousing to collect it.
44. When removing the steel coolant
pipes from the engine, take care not
to damage the smaller of the (2) pipes
and the nipple where it connects to the
engine block. The coolant pipe is a “slip-
fi t” on this nipple.
Engine Block Nipple
Coolant Pipe
9/07
Page 13
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com