user manual

36. Pull the elbow free from the manifold,
but do not twist it, as this will damage
the aluminum manifold.
34. Remove the coolant manifold and the (4)
bolts that secure it using a 10mm socket
wrench.
Torch or Heat Gun
Steel Elbow
HEAT
35. Grasp the steel elbow on the bottom of
the coolant manifold using a large set of
pliers. Using a small torch or heat gun,
apply heat to the bottom of the manifold
were the steel elbow is inserted.
33. Remove the gray release latches from
the elbow and insert them into the
connector.
Pull
9/07
Page 11
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com