user manual

29. Remove the (2) alternator-mounting
studs by placing a 6mm socket wrench
on the hex ends of the studs or “double-
nutting” them and unscrewing them from
the engine block.
31. Remove the coolant hoses from the
coolant manifold. Use a pair of pliers to
squeeze the clamps that secure them.
Pull both hoses free from the coolant
manifold. Also remove the passenger
side coolant hose from where it meets
the radiator and set this hose aside for
future modifi cations.
32. On the bottom of the coolant manifold, in
the engine valley, locate the heater hose
connector. Squeeze the (2) gray release
latches and pull the connector free from
the steel “elbow”.
Remove Studs
Coolant Hoses and Clamps
Release Latches
30. The following steps are for Intercooled
vehicles only! Non-intercooled vehicles
please skip to step 58.
On the passenger side of the vehicle,
under the nose, locate the white plastic
radiator drain valve. Open the valve and
collect the coolant in a drain pan for re-
use late in the installation.
Radiator Drain Valve
Pull
Double Nutted Stud
9/07
Page 10
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com