user manual

170. Route the wire along the ﬁ rewall, behind the

supercharger to the manifold barb at the left rear of the

supercharger manifold. Secure the hose and extended

white wire as necessary with the Ty-straps provided.

Manifold

barb

171. Install the re-programed computer on its bracket

using the two T20 TORX screws .

172. Carefully replace the three computer connectors

by pressing them in place and pushing grey larches

back into place untill they snap into their original loca-

tions on the black covers. Secure the connectors with

the red locking keys.

169. Install the length of 5/32” vacuum hose onto the

Magnavolt hose using the black plastic hose connec-

tor.

Hose connector

Magnavolt

hose

12/05

Page 45

2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com