user manual

54. Remove the throttle body by removing the four
mounting bolts with a 10mm socket wrench.
55. Carefully remove the original O-ring behind the
throttle body on the original intake manifold.
56. Install the throttle body O-ring into the groove on
the new inlet manifold. The LS2 throttlebody will be
installed after the supercharger assembly is installed
on the engine.
53. Vehicles with automatic transmission only.
Manual transmission vehicles please skip to step
the next. Move the automatic transmission fi ll tube
by pulling it fi rmly outward towards the fender of the
vehicle. It will only be necessary to move the tube 1/
4”- 3/8”. After installing the supercharger and mani-
fold assembly, check for contact between the fi ll tube
and the fuel cross-over pipe.
Move fi ll tube
12/05
Page 16
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com