User Manual

9
5
You can stop recording to check your
footage. After reviewing your footage,
move the REC/RET selector slider to RET.
Push the red REC/RET button. This will
return the tape to the point at which you
stopped recording and prevent a break in
the time code.
6
After the tape returns to the point at which
you stopped recording, move the selector
slider back to REC, and push the red REC/
RET button to resume recording.
• Cable length: Built-in ENG cable--31″ (78.7 cm)
• Clamp size (open): 1.25″ (31.75 mm)
• Dimensions: 3.58 × 2.22 × 3.28″ (90.9 × 56.4
× 83.3 mm)
• Weight: 4 oz. (113.4 g)
Specifications