PV-7451M Owner’s Manual Photo Tripod
Thank you for choosing Magnus. The Magnus PV-7451M Tripod employs an adjustable center column that converts to a four-section monopod for enhanced flexibility. Telescoping legs with flip-locks offer fast and easy adjustments, with enclosed spiked feet for all-terrain shooting. The threeway pan and tilt head offers total control over camera positioning, and the quick-release plate is equipped with a 1/4”-20 male thread for universal camera mounting.
Opening the Tripod 1 Loosen the pan handle and position it at an approximate 90° angle to the center column. 2 Pull out each flip-lock, extend the legs to the desired height, and relock each leg. Note: Always extend the legs from the top flip-locks first. 3 Rotate the spreader lock counterclockwise to release the center brace. Gently pull the legs out to the open position and rotate the spreader lock clockwise until secure.
Note: Make sure the screwhead handle is flat against the bottom of the quick-release plate before placing it back on the tripod. 4 Pull and hold on to the quick-release plate locking lever and insert the camera/ quick-release assembly into the tripod head. Using the Pan and Tilt Head Tip: Use the bubble levels to make sure your shot is parallel to the horizon. Tilting To use the tilt feature, rotate the pan handle counterclockwise.
Friction Control Friction control regulates the stiffness of the tilt feature. For less friction, rotate the knob counterclockwise. For more friction, rotate the knob clockwise. Adjusting the Center-Column Height 1 Rotate the centercolumn locking knob counterclockwise to loosen. 2 Adjust the center column to the desired height, and rotate the center-column locking knob clockwise to secure the new position.
Precautions • • • • • • • • • • • • • Safe operation of this product is the user’s responsibility. Keep this product away from children. The camera should be securely fastened to the quickrelease mounting plate before mounting onto the tripod. Never mount a camera to the tripod until all tripod legs are locked and stabilized. Make sure that this product is intact and that there are no missing parts.
