Owner's Manual

5.1.1 ) Battery level indicator
The battery capacity viewing area has five segments, each representing 20% of the battery capacity. When the capacity is full, all five
segments are all lit up. If the battery capacity is low, the battery indicator will flash indicating that the battery is low and needs to be
recharged immediately.
Flashing low battery indicator
5.1.2) Battery BMS voltage
The (BMS) battery management system will show an accurate reading of the battery voltage on the bottom right of the display at all times
(See Picture in Sec 5)
The lithium battery voltage will slowly decrease with use until it is empty and needs to be recharged. 48V Lithium batteries will be
approximately 54V when full and 40V when depleted.
SECTION 6: DISTANCE AND TIME INDICATOR
6.1) SWITCHING BETWEEN MODES
With the display on, press SET to switch between modes to select ODO, time, trip 1 and trip 2.
6.1.1 ) ODO
The ODO records your total mileage and cannot be cleared.
6.1.2) Time
The riding time parameter is automatically reset when powering off your e-bike.
6.1.3) Trip 1
Press the SET button for 5 seconds to reset trip 1.
6.1.4) Trip 2
Trip 2 represents your most recent ride mileage and will be automatically reset every time your e-bike is powered off.
21