Owner's Manual
Section 2: CURRENT INDICATOR
The current indicator represents the discharging current consumption of the controller while in use. Each segment is 2A, six segments are
>= 12A
Section 3: BACKLIGHT INDICATOR
Press the power button once to illuminate the backlight. The backlight indicator symbol will show when the backlight is illuminated (see
picture below). Press the power button again to turn off the backlight.
Section 4:
4.1) PEDAL ASSIST & SPEED SELECTION
- Click on the +/- UP or DOWN to change the PAS (pedal assist) level and change the power output and speed. The default mode is level 1
and ranges from level 0 to level 6.
- When set to level 0 the electric system is disabled and the e-bike will not provide any motorized assistance.
- Levels 1-6 will provide an increasing range of speed and power output.
- According to Federal Regulations the throttle on your e-bike is limited to 20 MPH. The pedal assist will continue to provide motorized
assistance up to 28MPH.
19










