Owner's Manual
C7 Display
FULL VIEW AREA
NORMAL VIEW AREA
With the display on ,the default indicators are ODO, time, trip 1, trip 2 as shown in fig below. Press SET to switch the display information.
Section 1: ON/OFF
- To power on your e-bike click the power button once.
- The display will show some of your system parameters immediately when turned on.
- On the bottom right you will see the systems voltage specific for your e-bike (either 36V or 48V).
- In the center you will see the wheel size and on the bottom left the tire width.
- These parameters should not be changed as they are factory set to your specific e-bike model.
With display on, press and hold for 3 seconds to power off your e-bike. With the display off, there is no battery power consumption. The
leakage current is no more than 2µA.
※The panel will power-off automatically when the e-bike is idle for 5 minutes (speed is 0 mph).
18










