Owner's Manual
5.3 Denition of Tampering and Recommendations
Modications to any part of your bike, such as the fork or frame, may make that part or the entire bike un-
safe. A poorly installed or modied component can increase the stress on all other parts, greatly increasing
their chance of failure. Modications can also adversely affect the handling of your bike, resulting in loss of
control, falls and serious injury. Please do not add, remove, or modify parts of your bike in any way before
consulting with a trained bike technician. We recommend you consult with us before you make modica-
tions or add parts, in order to conrm their safety and compatibility with your bike.
Warning
17
Category 2
Components which can only be replaced after approval from the bicycle manufacturer
Frame Hub-motor Wheel Brake Pads Bottom Bracket
Fork Brake System Rear Carrier
Category 3
Components which can only be replaced after approval from the bicycle or component manufacturer
Cranks Wheel without Hub Motor Tires Brake System
Chain | Belt Rim Tape Mechanical Brake Cables Handlebar
Seat Post Saddle Hydraulic Brake Cables Stem
Category 1
Components which can only be replaced after approval from the bicycle manufacturer/ electronic system provider
Motor Controller Electric Cables Battery
Sensors Display Controls Display Battery Charger
Category 4
Components which can be replaced without approval
Headset Inner Tubes Shifting Housing & Cables Kickstand
Pedals Chainring Cassette | Freewheel Grips
Derailleurs Front & Rear Lights Wheel Reectors Front Reector
Shifters Mudguards | Fenders Spokes Rear Reector
Recommendations & Maintenance