Operating instructions

Technical characteristics

General

Channels: 40 (80)

Modulation modes: AM/FM

Frequency ranges: from 26.565 MHz to 27.405 MHz

Antenna impedance: 50 Ohms

Power supply: 13.2 V

Dimensions (WxHxD): 130 x 34 x 176 mm

Weight: approx. 770 g

Accessories supplied: microphone with support,

mounting device,

screws.

Filter: ANL (Automatic Noise Limiter)

built-in

Transmission

Transmission power: 1 W AM / 4 W FM

FM mod. 2 kHz max.

AM mod. 95%

Power consumption: 1.5 A max.

Reception

Maxi. sensitivity at 20 dB sinad: < 0,7 µV - 110 dBm (AM/FM)

Maximum audio power: 3 W

Squelch sensitivity: minimum 0.3 µV - 117 dBm

maximum 1 mV - 47 dBm

Power consumption: 300 mA nominal

800 mA maximum

Trouble shooting

Your CB radio does not transmit or your transmission power

is poor:

Check that the antenna is correctly connected and that the SWR

is properly adjusted.

Check that the microphone is properly plugged in.

With the "push-to-talk" switch activated, the display flashes. Release

the "push-totalk" switch, then press it again to reactivate the trans-

mission mode.