Operating instructions

External loudspeaker

At the back side, the stabo magnum multi is equipped with a jack

For improving the fidelity of reproduction, a loudspeaker can be

connected using a 3.5 mm mono jack plug. Install the loudspeaker

such that all possibilities of injuries to you or your passengers are

excluded in case of an accident.

PA (Public Address)

To use the radio as a PA amplifier you have to connect an appro-

priate loudspeaker to the PA jack (15/D).

Microphone jack

Connect the supplied microphone to the microphone jack at the

left front side of the radio set. Make sure that the recess on the

plug is oriented downwards.

Adjustment according to countries (6)

The stabo magnum multi features three different channel

configurations.

Prior to using the radio set, one of the adjustments has to be

selected.

D 80 FM channels / 40 AM channels

This configuration is permitted in Germany only

EU 40 channels FM / 40 channels AM

EC 40 channels FM

To select or change the configuration, please proceed as follows.

1. Switch the radio set off.

2. To select D press and hold the button up.

To select EU press and hold the button down.

To select D press and hold the button up + down.

3. While pressing the button switch the radio set on again.

4. Release the button(s).

Afterwards, the display shows channel 9 and the radio set is ready

for operation with the new channel configuration.

You can select the requested channel by using the up/down button

now.

Before using your radio set abroad, make yourself familiar with

the applicable regulations for the respective countries and consider

a possible compulsory registration.