Specification Sheet

The World Depends on Sensors and Controls
OFFICES
2211 West Casino Road
Everett, Washington 98204 USA
425-353-8833
4467 White Bear Pkwy
St. Paul, MN 55110 USA
800-553-6418
www.SensataPower.com
MSH-M SERIES SPECIFICATIONS
MSH3012M MSH4024M
INVERTER SPECIFICATIONS
Input battery voltage range 9 to 17 VDC 18 to 34 VDC
Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5%
Output frequency and accuracy 60 Hz ± 0.05 Hz 60 Hz ± 0.1 Hz
Total Harmonic Distortion (THD) < 5% < 5%
1 msec surge current (amps AC) 70 120
100 msec surge current (amps AC) 40 82
5 sec surge power (real watts) 3900 5800
30 sec surge power (real watts) 3800 5400
5 min surge power (real watts) 3200 4900
30 min surge power (real watts) 3000 4500
Continuous power output at 25° C 3000 VA 4000 VA
Maximum continuous input current 400 ADC 267 ADC
Inverter efficiency (peak) 90.0% 93.7%
Transfer time 16 msecs 16 msecs
Search mode (typical) < 8 watts < 8 watts
No load (120 VAC output, typical) 30 watts 25 watts
Waveform Pure Sine Wave Pure Sine Wave
CHARGER SPECIFICATIONS
Continuous output at 25° C 125 ADC 110 ADC
Charger efficiency 87% 87%
Power factor > .95 > .95
Input current at rated output (AC amps) 18 28
GENERAL FEATURES AND CAPABILITIES
Transfer relay capability 60 AAC
Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation Standard with available temp sensor connected (battery temp 0 - 50 °C)
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection Yes, with two overlapping circuits
Overtemperature protection Yes on transformer, MOSFETS, and battery
Corrosion protection Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Dual AC branch rated output breakers No
Listings ETL listed to UL/cUL 458, CSA C22.2 No. 107.1-01
Warranty Three years parts and labor
ENVIRONMENTAL SPECIFICATIONS
Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non-condensing
PHYSICAL SPECIFICATIONS
Dimensions (l x w x h) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Shipping dimensions (l x w x h) 19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm)
Mounting Shelf or wall (vents not allowed to face downward unless ME-CB or MPX-CB is installed)
Weight 55 lb (24.9 kg)
Shipping weight 63 lb (28.6 kg)
Max operating altitude 15,000’ (4570 m)
Testing for specifications at 25° C. Specifications subject
to change without notice.
February 2017 Rev C Part #64-0497