Owner's Manual
Display
Error Code Table
-
If you still some questions about the display, please contact your Magnum dealer.
Error Code Denition Suggestion
“0x20” shown at speed Failure of controller Check controller
“0x22” shown at speed Failure of throttle Check throttle
“0x23” shown at speed Failure of motor’s phase wire Check motor
“0x24” shown at speed Failure of the motor’s hall Check controller
“0x30” shown at speed Communication failure Check connector to controller
Data Clearance
Whithin 10 seconds of turning on the display, when the display shows the TRIP interface, long press the M
To exit long press the M button. After clearance the subtotal mileage TRIP is 0, average speed is 0, and max
speed is 0. ODO information can not be cleared mannually on the display.
16