Operation Manual

At the same time, the appearance of main-screen is the confirmation that all standard settings or pre-
programmed settings are fully operational.
Use the auto-program as confirmed in Start menu approx. 14 days after date of activation. In this way
the memory of the thermostat is able to store and adapt historical temperature movements.
Important:
Changing standard settings is only possible from main screen, by using Mode (left button) and Menu
(right button)
Press the Mode button for temporary changes and the Menu button for permanent changes in
standard settings.
Always return to main screen after new settings are programmed.
Press Mode for temporary changes and next options appear in display:
Options Explanation
1. Temporary temperature : Used only when thermostat is in setback mode and extra heating
is required.
2. Thermostat Auto : Thermostat will follow factory settings or 7 days program.
3. Manual Control : The thermostat will heat continuously 24/7 according to the comfort
temperature.
4. Thermostat OFF : Thermostat is turned off and will not follow any program, however all
presets remain in memory.
5. Timer : Timer menu is used when there will be no heat requirement for a
long period of time, for example during holidays.
This is also used when new floors are installed, to allow a drying out
time and avoid possible construction damage because of early
heating.
6. Back to main screen : Return to main screen.
Scroll to option and press confirm to activate one of the above.