Operation Manual

Start up menu:
When switching the thermostat on for the first time, you will be asked a series of questions about your
heating system.
1. Language - you have a choice between English, German & French
2. Date - set to present date
3. Time - choose between 12 & 24 hr clock, then set to present time
4. Heating system - choose “with floor sensor”
5. Floor thickness - Enermat (floor adhesive & tiles) or Enercable (<5cm, <10cm or >10cm)
6. Standard settings - Factory preset settings, can be changed in later menus.
7. Comfort temperature - Factory setting 21.5°C, change now or later in menu.
8. Select timer menu - only for new floors. Please allow for drying out period.
9. Timer - set for when floor is completely cured.
The menu-structure is provided with 3 main programs:
Start-up menu : to program factory or change settings.
Mode : to change settings temporarily
Menu : to change settings permanent
The auto standard comfort period factory settings:
Monday till Friday : comfort heating during 06.00 till 09.00 and 15.00 till 22.00 hrs.
Saturday and Sunday : comfort heating during 09.00 till 23.00 hrs.
Besides the above-mentioned periods the thermostat works on stand-by and is auto-programmed for
lower setback temperatures to save energy consumption.
Explanation of the LED colors and signals :
Yellow : Heating system is operational. No energy consumption.
Red : Active energy consumption. System in heating mode.
Green : Heating system in setback period.
Red flashing fast : Sensor failure.
Heating system non-operational (Please contact Technical Support).
Red flashing slowly : Heating system in sleeper function
will be activated by timer at mentioned date/time.
Explanation main screen textures:
Comfort period : heating system operational
Setback : setback period activated
Heating : power on
Timer activates on : date and time of activation of the heating system
Thermostat off : heating system not operational
Manual control : auto-standard settings off - manual temperature adjustment +/-
Sensor failure : heating system non-operational