User Manual

IVx3 Injection Valve Manual
Rev. 03/2012 Page | 16
Overview:
IVX3 Valve Mode Overview:
OFF Mode – this is the default mode – the injection, purge and input ports are blocked.
Closed - no fluid can move through the valve.
Injection Mode – by applying an air signal to the Injection signal port the valve will open
allowing material into the mold through the Universal insert port.
Purge Mode – by applying an air signal to the Purge signal port the valve will allow
resin or solvent through to the Purge port.
Resin / Purge Input Hose with QD connector
Purge Outlet Hose
Universal Insert / Injection Port
Fluid Valve assembly
Inject signal port
Purge signal port