User Manual

Classic Pro Gun Manual
Rev. 08/2012 Page | 35
Clean the Components
 Discard the used seals and o-rings and clean the remaining parts in solvent.
 You have now disassembled the gun handle.
Assemble Classic Pro Gun Handle:
Note: Please refer to parts drawings for proper part numbers to assist you in
assembling the gun handle.
Replace O-Rings and Seals
 Discard used o-rings and seals and obtain new ones.
Reinstall O-Ring on Spool Assembly
1. Reinstall the two o-rings (O-U-011) on the spool assembly.
2. Lubricate the o-rings with Pro Gun Oil™ (6706-3-1).
Reassemble Trigger Retainer
1. Place two o-rings (O-U-109) in the external groove on the trigger retainer.
2. To install a detent (stop) in the gun trigger for the two stage trigger you must
install the steel balls in the trigger retainer (steps A through C). (If you do not
want the detent, continue to step 3.)
O-U-011 (O-RING)
58647-1 (SPOOL ASSY.)
03198 (BALL)
O-U-109 (O-RING)
58648-1 (TRIGGER RETAINTER)
O-RING