User Manual

Classic Pro Gun Manual
Rev. 08/2012 Page | 30
Mix Housing Options
 Standard Mix Housing (5104-20-1) – Use with all turbulent mixers and most
applications.
 FIT Mix Housing (VPG-1001) – Use with FIT style spray tips. Uses mixer
VPG-1003.
 FIT Low Flow Mix Housing (VPG-1001-1/4) – replacement mixer TRT-1018-1/4
 Ratio Block – Pail Dispenser Mix Housing (58735-1) – separates material
streams.
Distribution Ring Selection
There are three different distribution rings and they are as follows:
 Standard Distribution Ring 5104-17-1 (58607-1) – Used for most applications
where outputs are not critical.
 Filled Resin Distribution Ring 5104-18-1 (58701-1) – Used in application
where the resin is filled above 20 percent. Use with high filler loads and high
outputs.
 Critical Mix Distribution Ring 5104-19-1 (58703-1) – Use in low output
application, where it is important to restrict flow.
Turbulent Mixer Selection
There are two different turbulent mixers, in two different materials.
 Standard Turbulent Mixer 5107-27-3 – Use for most applications where
outputs are not critical. Use with chopper and saturator applications.
 Glass Filled Special Turbulent Mixer 5107-27-4 – Use with abrasive materials
and filled resin applications where durability is required.
 Critical Mix Turbulent Mixer 5107-27-2 – Use for low output applications such
as gel coat. In low flow application the critical mix turbulent mixer will work
best.
 Glass Filled Critical Mix Turbulent Mixer 5107-27-5 – Use in low flow
applications where the material is abrasive and durability is required.