Instruction Manual

CB-6000-RT Material Monitor Manual

Rev. 10/2012 Page | 26

RESIN TOTAL METER SETUP SHEET:

I – InP Counter A Input Parameters

Display Description Factory Setting MVP Setting

A Cnt Operating Mode cnt

ArESEt Reset Action 2ErO

AdECPt Decimal Position 0 0.00

ASCFAC Scale Factor 1 Enter factor here

ASCALr Scale Multiplier 1

ACNtLd Count Load Factor 500 0

A P-UP Reset Power-Up no yes

(All other parameters in I – InP remain as set by the factory)

QUICK REFERENCE:

6 – SPt Setpoint (alarm) Parameters SP – 1 settings

Display Description Factory Setting MVP Setting

Lit – 1 Annunciators nor

Out – 1 Output Logic nor

SUP – 1 Power Up State off

Act – 1 Action off tOUt

ASn – 1 Assigment A Cnt

SP – 1 Setpoint Value 100 Enter signal out value

tOUt – 1 Setpoint Time Out 1.00 2.00

AUtO – 1 Auto Reset Action no 2ErOAE

rSd -1 Reset with Display no yes

(All other parameters remain as set by the factory)

QUICK REFERENCE:

PAR

6 -SPt

PAR

Pro