Manualshelf

Owner's manual

ManualsBrandsMagnum Venus Plastech ManualsEquipmentCB-6000-RGT Imperial units PROGRAMMING
12345678910
9
This is a test mode for the panel buttons. Push the INCREMENT/ON
button and the display will change to this:
Push the DECREMENT/OFF button and the display changes to this:
Push the RUN/PROGRAM button and the display changes to this:
Push the RESET/CLEAR button and the display changes to this:
Step 12) Pushing the Down Cursor button will change the display to
look like this:
This is a standard test pattern that appears. If anything else appears during
this step the unit is defective and should be replaced.