Owner manual

Advantage Gelcoater

Six Month Maintenance Checklist

Part: Procedure:

Gauges and Regulators Check for wear, damage, and proper

operation

Resin Accumulator Remove and clean inside. Replace:

spring, ss ball, o-ring in charging

valve

Resin Filter Wash and inspect filter screen for

damage

Power Head Clean silencer with solvent and blow

dry

Resin Pump Lower Assembly Check the pickup hose and wand for

leaks or damage. Check inside the

center section for packing leaks

Flush Tank Clean any residue and rinse with

solvent

Air Lines Check for leaks, wear, and kinks.

Replace lines as needed.

Gun Head Replace seals and o-rings

Catalyst Pump Check all bushings for wear and

damage. Check the pump cylinder for

wear. Replace ss balls, o-rings,

springs, piston seal and packings