Owner manual

Advantage Gelcoater
Advantage Gelcoater
Quick Reference
Chapter
1
1. Place suction wand in adequate resin supply
2. If multicolor, select which color pump you wish to
use
3. Prime resin pump
4. Prime catalyst pump
5. Adjust catalyst %
6. Increase air pressure to resin pump to
desired output
7. Check all hoses for fluid or air leaks
8. Fill & check solvent system
9. Set air pressure to gun
10.Adjust & set air assist
1
NOTE
This manual contains the information you need to operate,
shutdown, and perform simple maintenance and repairs on
your Advantage Gelcoater equipment. Please read the
manual carefully. Follow the steps for each procedure in
the order the steps are given, otherwise you may damage
the equipment or cause serious injury to self and others.