Owner manual

Advantage Gelcoater

Air Assist Nozzle - 419 #30419

Install Nozzle Assembly

Insert turbulent mixer into the mix chamber.

Insert static mixer into nozzle extension body.

Attach nozzle extension body to gun mix chamber.

Attach selected nozzle onto the extension body.

Insert the nozzle into the retainer (see Figure 29).

Tighten nozzle retainer onto the nozzle extension body.

NOTE

Use lithium grease on mix chamber and all nozzle

extension body threads.

CAUTION

To avoid contamination of the laminate, do not apply

grease to any part that will contact the interior of the gun-

head.

NOTE

While tightening nozzle retainer onto nozzle exten-

sion body, hold nozzle in the appropriate position to

get desired spray pattern.

Figure 28: Apply Grease to

Nozzle Retainer

Figure 29: Insert Nozzle in

Retainer