Owner manual

Advantage Gelcoater

Chapter

To achieve the proper spray patterns, gun nozzles must be selected and

tested and matched to the appropriate pump pressure.

Before Testing and Adjusting

Lay out large sheets of cardboard or wax paper for spraying.

Have an appropriate empty container to flush the gun into.

Gelcoat temperature should be at recommended temperature by gelcoat

supplier.

Select Nozzle

Start with nozzle (400067C) as an average nozzle size #31121.

ADVANTAGE

Gelcoater

Testing & Adjusting

NOTE

Sheets should be at least 5-ft. (150 cm) long and 3 ft.

(91.44cm) wide.

NOTE

Refer to Nozzle Chart.