Owner manual

Advantage Gelcoater
Chapter
3
Uncrate Gelcoater.
Uncrate the Advantage Gelcoater and set it on a level floor surface at
least 3 feet (90 cm) from the nearest wall to allow easy access.
Wall Mount Unit Installation
Fasten Brackets to the wall approximately 36 inches above the floor.
Bolt the Advantage Gelcoater frame onto the bracket with the bolts pro-
vided as shown in Figure 1.
Portable Unit Installation
Unit is shipped assembled except for Catalyst Pump and Jug System
ADVANTAGE Gelcoater
Installation & Set-Up
NOTE
Use appropriate fastening devices for the type of wall
the gelcoater will be mounted on.
6