Owners Manual

© 2017 Sensata Technologies 1
I nt roduct ion
1 .0 I nt roduct ion
Congratulations on your purchase of the CSW2024 pure sine wave inverter—
under the Magnum-Dimensions brand from Sensata Technologies. The
CSW2024 inverter is a “pure” sine wave inverter designed to be powerful,
yet simple to operate, and will provide you with reliable AC power for trouble-
free use. Please review this Introduction section to familiarize yourself with
the features and benefi ts of your CSW2024 inverter.
1 .1 CSW 2 0 2 4 Front Pane l Fea t ures
The front panel of the CSW2024 inverter is equipped with the following
features (see Figure 1-1):
1 . Se rial N um be r – the unique identifi cation number assigned to each unit
(with a model-specifi c prefi x).
N ot e: Enter the inverter’s serial num ber in the t able on page i. I t is t o easier
to record this inform ation now, inst ead of trying to gather it after the unit
has been installed.
2 . GFCI – a Ground Fault Circuit Interrupter protected AC outlet. The 20-
amp GFCI outlet quickly stops the fl ow of electricity in the event a ground
fault occurs on the device that is plugged into the inverter.
3 . St at us I ndicat or – an at-a-glance LED that provides the inverter’s
status—lights green, red, or amber (see Section 3.0 Operation).
4 . Digita l Display – a three-character alphanumeric display that shows
the inverter’s measured battery voltage, total AC output power, and any
error or warning codes.
5 . Pow er / Select Butt on – a momentary button switch that allows the
inverter to be quickly turned on or off.
6 . Rem ot e Sw it ch Port – a RJ12 connector that allows an optional remote
switch to be connected via a remote cable.
N ot e: Rem ote sw it ch is sold separately ( PN: CSW- RS) .
7 . USB Port – allows USB-enabled devices to be powered and charged.
CSW2024 Power Inverter
Serial Number
120VAC 60Hz, 2000W / 16.7A continuous
St atus
Power / Select
USB
Remote
2
1
7
3
4
6
5
Figur e 1 - 1 , Front Panel Fea t ur es