Owners Manual

© 2015 Sensata Technologies 23
5.0 Specifi cations
5.0 Specifi cations
Table 5-1, CSW Series Specifi cations
Model
CSW412 CSW1012 CSW2012
Electrical Specifi cations
Continuous Power
1
400 W 1000 W 2000 W
Surge Power (Peak)
2
800 W 2000 W 4000 W
AC Output Voltage (12.5V) 120 VAC RMS ± 5%
AC Output Current 3.3 AAC 8.3 AAC 16.6 AAC
AC Output Voltage Range 104-127 VAC
AC Output Frequency 60 Hz ± 0.5 Hz
AC Output Waveform
) Pure sine wave (<3% THD)
AC Output Receptacle NEMA 5-15, Dual GFCI with LED indicator
Optimum Effi ciency >90%
DC Input Voltage (Nominal) 12.5 VDC
DC Operation Voltage Range
3
10.5 - 15.75 10.5 - 15.5 VDC
DC Input Current (Full Load) 38 DCA 94 DCA 187 DCA
DC Input Current (No Load) <0.8 ADC <1.2 ADC <1.2 ADC
DC Output (USB port) 5V, 750 mA
Protection
Low Voltage Alarm 11.0 VDC 11.2 VDC
Low Voltage Shutdown 10.5 VDC
Low Voltage Recovery 12.0 VDC 11.8 VDC
High Voltage Shutdown
3
15.75 VDC 15.5 VDC
Output Power Warning NA Yes, with warning code
Output Power Shutdown Yes Yes, with shutdown code
Output Power Shutdown Yes Yes, with shutdown code
Temperature Warning NA Yes, with warning code
Temperature Shutdown Yes Yes, with shutdown code
Display Specifi cations
LED Status Indicator Yes (Power, Fault)
Digital display NA volts in, power out, error codes
General Specifi cations
Operating Temperature 32° F to 104° F (0° C to 40° C)
Inverter Weight 3.8 lb (1.7 kg) 6.6 lb (3.0 kg) 11.5 lb (5.2 kg)
Inverter Size
(L x W x H)
CSW412: 7,9 x 6.9 x 3.4” (20 x 17.5 x 8.7 cm)
CSW1012: 12.6 x 6.9 x 3.4” (32.1 x 17.5 x 8.7 cm)
CSW2012: 16.5 x 9.1 x 3.5” (41.9 x 23.0 x 8.9 cm)
Warranty One Year
Regulatory Approval
Conforms to UL STD 458, Certified to CSA STD C22.2 No. 107.1
1: Specifications met when DC voltage at nominal (12.5V) and temp at 25°C.
2: Surge ratings are based on resistive load (output voltage may drop).
3: Damage can occur if input voltage exceeds 16 VDC.