Specifications

TIME-CODE EQUIPMENT
485
THE PROFESSIONAL’S SOURCE [phone] • FAX: [phone]
1•800•947•9901
HORITA
VLR-100
VITC / LTC Reader, LTC Generator
Same combination high-
speed VITC and LTC
time code reader as the
TCD-100, plus it gener-
ates LTC time code. Has
a .56-inch high 8-digit LED display
readout with brightness control.
Same features as the TCD-100, PLUS —
■ Front panel switches for selecting time code or User Bit data
display, display Run-Hold operation, RDR/GEN/SET, and
VITC or LTC
■ LTC Generator outputs Drop Frame/Non-Drop Frame LTC
Time-Code and/or translates VITC into LTC
TR-100 LTC Time-Code Reader
■ 0.8˝ high LED character display is suitable for viewing across a room
■ Brightness control adjusts display intensity for indoor use in a darkened
room, or for outdoor use in bright light
■ Reads LTC from 1/30 to 100x Play Speed, Forward and Reverse
■ Outputs reshaped time code for time code copying needs
■ Auto selects between 24FPS (film), 25FPS (PAL), Drop/Non-Drop Frame
■ Translates SMPTE time code to MIDI time code
TCD-100 VITC / LTC Reader
■ 0.8˝ high LED character display is suitable for viewing across a room
■ Reads LTC from 1/30 to 100x play speed in forward and reverse. Reads
VITC from pause to over 30x play speed in forward and reverse
(depending on tape format).
■ Displays hours, minutes, seconds, and frames, plus indicators for read-
ing VITC or LTC and Drop/Non-Drop Frame format
■ Switch select time code/User Bit display, display Run/Hold
■ All switches are located at rear of unit. "Auto" select mode permits
unattended operation by automatically switching to VITC when LTC is
not available
■ Brightness control adjusts display intensity for indoor use in a darkened
room, or for outdoor use in bright light
■ Outputs 2v P-P reshaped LTC when reading LTC
VLR-100PC
VITC / LTC Reader, LTC Generator, RS-232
All features of the VLR-100, PLUS —
Communication with PC using RS-232 serial port. Includes TC-
TOOLKIT Tape Logging Software
PHOTO - VIDEO - PRO AUDIO
TR-100 LTC Time-Code Reader ......................................339.95
TCD-100 VITC / LTC Reader ........................................379.95
VLR-100 VITC / LTC Reader, LTC Generator ..............499.95
VLR-100PC VITC / LTC Reader, LTC Generator ..........609.95
TC-TOOLKIT Tape Logging Software included with the TRG-50PC, VWG-50PC, VLT-50PC, VLR-100PC
TOOLKIT is a tape logging/EDL software that comes bundled with all Horita PC Time-Code models. Offers six Time-Code programs, plus
a seventh menu-select program. All programs are easy to understand and operate. Includes serial cable, DB-9/DB-25 Adapter and disks.
PC-LOG captures Time-Code or User Bits and calculates dura-
tions with a single keystroke. Log tapes while reading or generating
Time-Code, add comments, print, disk I/O, search for keywords
or phrases using wildcard characters, print “Search Report”. Ten
“Macro Keys” permit single keystroke to capture time; insert any
pre-typed message of up to 34 characters; Scene/Take counter
macro key operates with special IN/OUT macro keys to tag
entries; auto increment Take counter.
TC-CALC “pop-up” Time-Code calculator with separate pop-up
tape timer does all Drop-Frame/Non-Drop-Frame and Film Foot-
frame Math; imports and exports Time-Code, User Bits and other
calculator values directly into and out of word processor docu-
ments, database or spreadsheet fields, etc.
TC-TRN converts PC-LOG file into CMX 340 EDL format.
TC-DBT converts log file into two delimited ASCII files for import
into database.
TC-TRK generates commented EDL from simple playback of an
off-line tape containing SMPTE Time-Code from source tapes,
determines Reel #, Edit Type, Mode, Source/Record IN and OUT
times, and adds comments from PC-LOG files.
TG-SET quickly presets generator Time-Code, User Bits from key-
board; single key to set Time-Code to PC’s Real-Time clock time,
User Bits to date; Start/Stop Generator; turn display On/Off.
(Operates TRG-50PC and VLR-100PC only.)
TCTK menu allows quick movement between the programs.
TIME-CODE EQUIPMENT with LED DISPLAY