Specifications

TEST EQUIPMENT
524
LEADER
5864A/413S
EFP /ENG Test Instruments
Designed for EFP and ENG operation, the 5864A waveform monitor and 413S test generator feature compact size,
light weight, and 12v DC power operation. Thus full monitoring facilities can be carried into the field and powered
from NP-1 batteries, battery belts and vehicle power. Operating controls are miniaturized to facilitate the maximum in
monitoring options with the operating simplicity demanded in field work.
5864A Waveform Monitor
A two-input Waveform monitor that
offers full monitoring facilities for cam-
eras, VCRs and video transmission links,
the 5864A offers front panel selection of
A or B inputs, the choice of 2H or 2V
display with Sweep magnification, and
Flat Frequency response or the insertion
of an IRE filter. In addition, a switchable
gain boost of 4x magnifies setup to 30
IRE units, and a dashed graticule line at 30 units on screen facilitates
easy setting of master pedestal. Intensity and focus are fixed and
automatic for optimum display. Supplied with an instruction manual
and DC power cable.
413S Test Signal/Pattern Generator
A signal source to be integrated into
field operations, the 413S provides
both video and audio test signals for
system checkout, tape lead-in and
source identification. Video test pat-
terns include a flat, 100% white
raster, ENG Color Bars, EIA and
SMPTE Color Bars. The 413S also
provides balanced audio output
using the standard XLR connector. The level is zero dB and frequen-
cy is selectable from 400 or 1000 Hz. Of particular value is a field
programmable 8-digit source identification that is superimposed on
the selected video pattern. Two sizes and screen locations can be
selected, or the source ID can be switched off.
LR-2451 Four EFP/ENG Instrument Rackmount
The LR-2451-011 rackmounts up to four EFP/ENG instruments in a 19-inch
rack, taking up only 3 standard vertical rack units (5
1
⁄4˝) of vertical space. A front-
panel power switch permits distribution of 12v DC to all units at once.
LR-2452-02 Base Plate
Accommodates any two EFP/ENG units and provides switched power distribution.
Most Orders Shipped Within 24 Hours
5835 Stereo Audio Monitor
The 5835 provides the means to monitor stereo signals with an X-Y plot that shows both amplitudes and
relative Phase of L and R signals (a Lissajous pattern). Further, an automatic alarm is triggered if a serious
Phase error results in a significant L-R component for more than five seconds. The warning appears on a
front-panel LED and can be rigged for a remote alarm. Two interchangeable graticules allow set up for the
standard of L versus R plot or the newer plot of L+R versus L-R. Balanced (XLR) and single-ended
(phono-type connector) inputs are provided. A -20 dB, 0 dB, +10 dB range switch includes a calibration
setting and is augmented with a variable control. Mounts in a standard half-rack.