Specifications
TEST EQUIPMENT
522
LEADER
Waveform Monitor with Luminance Linearity
The standard workhorse of studio monitoring, the 5860C handles routine monitoring operation, plus
offers extended operating options such as lH, 2H, 1V and 2V sweeps for closer Waveform inspection and
vertical amplifier response choices of flat, IRE (low pass) and Chroma A Differential-Step filter facilitates
luminance linearity checks using staircase signals. Differential-Gain filter also sets up differential gain
measurements. The 5860C syncs to the selected A or B feed or accepts Blackburst or Composite Sync as
an external reference. Built-in calibrator and On-Off control of the DC restorer is also provided. Picture
monitor output jack drives a video monitor with the selected A or B video feed. Fits half-rack adapter.
5850C Vectorscope with Electronic Graticule
The perfect mate for the 5860C Waveform Monitor, the 5850C extends monitoring and timing adjust-
ments into Chroma aspects. It accepts a Phase reference from either input (A or B) or from an external
reference (can be composite video, blackburst or CW Subcarrier). Unique to the 5850C is an electroni-
cally-generated scale of coarse and fine error limits for either 75% or 100% Color Bars. These targets
allow precise adjustments from relatively large viewing distances and eliminate the need for fussy center-
ing adjustments. The illuminated internal graticule facilitates Differential Gain and Phase measurements.
An unblanking input jack on the rear panel accepts a strobe signal from Waveform monitors equipped
for line-select operation for vector display of selected lines. Electronically-generated graticule (scale) gives
an across-the-room indication of vector error that is parallax free and immune to centering error.
5222 Multisystem Composite/Component Waveform Monitor
Operates in both NTSC and PAL systems, providing powerful monitoring in composite, S-Video and component applications. It features 8-
channel operation in groups of four with A/B selection. Overlay and parade displays may be selected, and
sync may be chosen from CH1-A, CH2-A, CH1-B, CH2-B or from an external reference. The video of
the selected input may be monitored, and the picture displays the line(s) highlighted during line-select
operations. Full-raster line selection is offered with on-screen readout of selected line(s) in both NTSC
and PAL notation. Menu controlled setup provides access to fundamental operating choices, such as DC
clamp speed, IRE unit or volts readout, etc. On-screen readouts include TV system, TV field and line
select, as well as channel in use for sync and cursor readouts. Cursors gauge level, time and readout in
IRE, volts, voltage ratio (in % or dB), time-difference, or frequency. Operating flexibility is extended
through remote control and memory storage, with local or remote recall of up to 10 panel setups. A uni-
versal power supply accepts 90-250v AC, 48 to 440 Hz. DC power (11-20v) is also an option.
■ Handles NTSC, PAL and SECAM
■ 8 Channels plus EXT REF
■ Parade and Overlay Displays
■ Picture Display (with Line-Select Strobe)
■ Full Line Select with 525/60 and 625/50
Notation
■ Menu Selected Setup
■ Memory Storage of 10 Panel Setups
■ Cursor Measurement of level and time
(0.5%)
■
Level Cursors read in Volts, IRE, % and dB
■ Dual Filter Display
■ RGB and YRGB
■ Y/C Monitoring
■ X-Y Operation and White Phosphor
(Option)
■ Universal Power Supply (90-250v,
48-440 Hz
LR-2400VI: Rackmount for 5870, 5872A, 5850C,
5860C, 5212, 5222, 5100, LV-5100D/DE/DU,
LV-5152D/DA, LV-5836B, 5835....................................227.95
LR-2400VI-02: LR-2400VI without a blank panel.........204.50
LR-2427I-U: Cabinet with Handle and Bottom Feet for 5870,
5872A, 5850C, 5860C, 5212, 5222, 5100, LV-5100D/DE/DU,
LV-5152D/DA, 5836B, 5835........................................... 125.00
LR-2450-16I: Rackmount Adapter for 408/408NP.......... 183.95
LR-2450-20I: Rackmount Adapter for 430...................... 269.95
Rackmount Adapters
5860C
Corporate Accounts Are Welcome