Specifications
AVM-510/510N/510C/510T
TEST EQUIPMENT
514
MAGNI SYSTEMS
We Ship Worldwide
Automated Video Signal Monitors
Magni’s AVM-510 Series represents the next generation
of monitoring equipment. High-performance, high reso-
lution Waveform Monitor/Vectorscopes with real-time
auto-measure capability, they offer the best solution for
identifying and alarming out-of-limit conditions in
your video signal. Designed for the operational areas of
broadcast and cable stations, production and post-pro-
duction facilities, the AVM-510 Series does the tedious
work your staff is not fond of doing. Advanced features
measure key video signal parameters without requiring
a test signal. Select from an array of Measurement sets
and alarm capabilities that simplify error detection
and reporting in all multiformat and multistandard
television facilities. This frees producers and editors from interpreting Waveforms or graphs and to focus solely on creative
content – with the confidence that any signal problems will be immediately flagged.
AVM-510 Series Applications:
Transmission Facilities
The monitors provide continuous monitoring of signal quality,
Waveforms, Vector displays and Measurement results. They can
also record any failures to a PC via the Magni Logbook software.
Post-Production
Use the WVM Series to monitor Video and Audio Signal parame-
ters and to replace small-screen CRT Waveform and Vectorscope
units mounted in your console. The behind the scenes
PictureGuard capability is ideally suited to post-production work.
Television Studio and Master Control
Replace your Waveform/Vectorscope with direct viewing of
Measurement parameters on any video monitor. Quality control is
simplified as you overlay your Waveform and/or Vector over the
picture for total assessment of video signals. Store up to six differ-
ent Measurement setups to assist operators in routine checking.
Multiple-camera setup is simplified by comparison of stored
images. Measurement alarms allow unattended and continuous
monitoring of all parameters.
The AVM-510 Series can be utilized anywhere where video signal quality is important – studios, TV stations, as
well as video production, transmission and routing.
AVM-510 is packed with features to perform comprehensive
monitoring and measurement functions for video signal proof
of performance and signal verification. It is specifically designed
for “live” video signals with or without VITS (Vertical Interval
Test Signal), as well as for Automated Measurement Standard
Frequency Response Test signals and standard color signals.
Providing key information for applications in post production,
it is ideal for monitoring the video signal quality of switchers,
cart machines, video servers, VCRs and disk recorders.
AVM-510N adds a measurement set for non-linear distortions
like Pulse-and-Bar, Differential Phase, and Differential Gain.
AVM-510N adds a measurement set for non-linear distortions
like Pulse-and-Bar, Differential Phase, and Differential
AVM-510C adds components measurements and SDM series
interface
They support IBM-compatible PCs, Sierra switchers, US
Robotics modems, and the Magni 700 Series VITS Inserters