Specifications

DC-1
Composite to Component Decoder
The DC-1 interfaces analog com-
posite or S-Video signals to analog
component video environments..
Separating composite or S-Video
inputs into component Y/R-Y/B-Y
or RGB, the DC-1 facilitates the
multi-format interface require-
ments of computer graphics, mul-
timedia presentation, post produc-
tion and broadcast systems. A
three-line adaptive Digital Comb
Filter eliminates cross-color, cross-
luminance, dot crawl and provides
6 dB of chroma noise reduction.
DC-1 Decoder.....................949.95
StudioFrame Coders — Encoders/Decoders/Transcoders
VIDEO EQUIPMENT
504
NOVA SYSTEMS
Used Equipment Bought, Sold and Traded
■ Zero Insertion Delay, Frame of Memory
■ Two composite, one S-Video output.
■ Analog RGB (sync on Green or all three), RGB/Sync
and YUV (Betacam) inputs.
■ 10-bit processing, 8-bit D/A conversion
■ Y and C pre-comb filtering for maximum encoding
performance
■ Remote Serial Control, Output Level Control
■ Color Bar Output Selectable
NC-1 RGB/Component to Composite/S-Video Encoder
The NC-1 is a 10-bit digital encoder that converts analog RGB or component video into Y/C and composite video.
Designed to facilitate multi-format interface requirements, the module incorporates the latest digital video processing
techniques, along with luminance and chrominance pre-comb filtering to assure the highest quality encoding. A
frame of memory is utilized to provide an effective zero insertion delay.
XC-1 and XC-2
StudioFrame Transcoders
The XC-1 and XC-2 facilitate
the various analog component
interfacing requirements of
computer graphics, multime-
dia presentation, post produc-
tion and broadcast systems.
The XC-1 converts Y/R-Y/B-
Y (or YUV) inputs to RGB
(or RGB/S) outputs. The XC-
2 converts RGB inputs with
or without separate sync to
Y/R-Y/B-Y or YUV outputs.
V-SW/SD-SW
4x1 Analog Video and 4x1 Serial Digital Switcher
Designed for high performance analog and digital video switching, the modules are
controllable either through the front panel, direct GPI, or optional RS-232/422 serial
interface. An external sync input allows for vertical interval switching. Multiple mod-
ules may be ganged together for multi-channel or analog component switching environ-
ments. Switcher modules slide in and plug directly into the front of the StudioFrame
chassis and utilize a passive rear interface card for I/O connections.
VSW Analog Video Switcher ............................................................................699.95
SDSW Serial Digital Switcher ........................................................................1049.95
NC-1 Encoder ........................................................1799.95
XC-1 Transcoder.......599.95
XC-2 Transcoder........699.95