Specifications

VIDEO EQUIPMENT
501
THE PROFESSIONAL’S SOURCE [phone] • FAX: [phone]
1•800•947•9901
PHOTO - VIDEO - PRO AUDIO
DPS
VDA-1000 Video Distribution Amplifier
The VDA-1000 is a 1 x 4 Video DA. The video input is coupled
and features a switchable 75 ohm input termination. Space saving
and economical, it is suitable for numerous applications, including
tape duplication
VDA-1000 Personal VDA ................................................139.95
RS-2800 Video Routing Switcher
The RS-2800 may be configured as either a
4 x 1 Matrix Switcher utilizing the BNC con-
nectors on the back of the card, or as an 8x1
switcher if used in conjunction with the ES-
2000 Rackmount Expansion System (switching
over the bus connector). Compact, economical
and a super-clean video processor, it features vertical interval
switching and addressable RS-232 control.
RS-2800 Personal Routing Switcher ..................................269.95
VT-2600/VT-2600WB
TBC IV and TBC IV-PLUS ‘Personal’ TBC Cards
The TBC IV utilizes component digital 4:2:2 processing and fea-
tures composite and S-Video inputs and outputs. Whether used in
PC or mounted in a DPS ES-2000 series rackmount expansion
chassis, it can be controlled using the standard Windows control
software or via a DPS RC-2000 or RC-2001 multi-channel remote
control unit. Adjustments include full proc amp and color balance,
horizontal and vertical Y/C delay, freeze field, freeze frame, variable
strobe, film-mode strobe, GPI freeze, memory store/recall and gen-
lock timing.
The TBC IV-PLUS adds a 3-line Adaptive Comb Filter Decoder
for the composite input, making it suitable for use with U-Matic-
SP VCRs and as a TBC/Synchronizer.
VT-2600 Personal TBC IV Transcoding TBC card ............859.95
VT-2600WB TBC IV ‘Wideband’....................................1199.95
774-532 Breakout Cable Provides GPI,
Advanced Sync & RS-232 Control for TBC IV....................19.95
ES-2200 Dual Channel Expansion System
The ES-2200 provides power and control for two TBCs, router, DA or
MicroSync cards in a compact 1U rack chassis. Independent operation
of the cards is provided via the front panel controls. Two memory loca-
tions and a unit Reset function are available for each channel. A rear
panel RS-232 connector provides compatibility with the DPS RC-2000
and RC-2001 remote control panels and software programs. Although
the same basic frame is used for many different DPS modular products,
various front panel and firmware combinations provide application spe-
cific functionality. Typical configurations include Single and Dual
Channel TBC, Video Synchronizer, Audio Synchronizer and
Audio/Video Combination System. This building block approach
makes it easy and economical to reconfigure systems.
ES-2200 Dual Audio Expansion Chassis ..................................549.95
ES-2000C
12-Channel Rack Chassis with Integrated Controller
High density, high quality
video signal processing is
possible using the ES-
2000C 12-unit
Rackmount Expansion
system. Four rack units high, this versatile chassis provides power and
control for multiple MicroSync, TBC, Video DA and router cards.
An integrated front panel controller enables the ES-2000 to address any
combination of up to eight cards. An RS-232 interface provides for
remote operation using DPS control software, or via the optional RC-
2001 remote. The passive back plane of the ES-2000 can be used as a
video bus to connect the outputs of multiple MicroSync cards into the
8x1 matrix of the RS-2800.
Ideal solution for multi-channel satellite systems, as well as CATV,
mobile production, teleconferencing and other applications.
ES-2000C 12-Slot Expansion Chassis ....................................1199.95
RC-2000 Remote Control
The RC-2000 is a low-cost remote control which can operate any com-
bination of up to eight TBC or MicroSYNC cards as well as the
V-Scope, DPS-235 and DPS-290. A compact desktop unit, the remote
features ten non-volatile memory locations per channel. Four precision
rotary shaft encoders enable instant adjust-ment of all proc amp parame-
ters and genlock and configuration settings. Power for the unit is sup-
plied by the DPS Personal TBC or MicroSYNC card(s) being controlled
or, when used with a DPS rackmount product or over long distances, by
an optional DC adapter. The RC-2000 provides a single
RS-232 output
which terminates in a 4-pin telephone handset connector.
RC-2000 Remote Control ......................................................239.95
VM-2000 Personal V-Scope
The VM-2000 Personal V-Scope produces a digitally synthesized
waveform monitor and vectorscope display which can be super
imposed onto any video signal. It is PC compatible and comes
with control software. Any NTSC video signal may be input to the
VM-2000 which provides a buffered video output, a superimposed
(software controlled) video output, and a full-time waveform/vec-
tor video output. When combined with the Personal TBC IV, the
V-Scope provides a fully integrated video processing, manipulating
and monitoring environment.
VM-2000 Personal V-Scope ..............................................849.95