Operator`s manual

Operating the MM-410/AVM-510A
6-24
Print the vector using several settings of Print Density. At low settings, you will get nothing but the
vector graticle. At higher settings the dots appear, and at very high settings the transitions are visible in
the print.
Print a waveform of live video. With a low setting for Print Density, none of the chroma or noise is
printed. Higher settings print all the noise and chorma. There are times when the printed image needs
to show all the noise and chorma, which requires high levels of Intensity, Persistence, and Print
Density. There are other times when only the average video level is important, and lower settings are
used.