Operator`s manual

Operating the MM410/AVM-510A
6-5
VECTOR Sub-Menu
This section describes each of the VECTOR sub-menu options.
+V SWITCH
Lets you turn on/off the +V switch for a vector display. When off, a PAL type vector is displayed with
12 boxes. When On, an NTSC type vector is displayed with 6 boxes.
EXT PHASE PRESET
Lets you set (by horizontal bar graphs) the external phase presets for the following options to correct
each phase-to-graticule:
•
INPUT A: CPST-1/S-video
•
INPUT B: CPST-2/SMPTE/EBU/BETA/MII/S-video/GBR
COLOR BARS
Lets you select between a 75% or 100% color bar display.
OTHER Sub-Menu
This section describes each of the OTHER sub-menu options.
LOCK
Lets you select a NARROW or WIDE lock for unstable signals.
SERIAL PORTS (AVM-510A)
MODEM PRINTER PORT
Lets you select between PRINT SCREEN, MODEM/LOGBOOK, REPORT, or NOT USED.
If a modem is connected to your AVM-510A, you can use it to transfer measurement report file data
and then print it via a remote computer.
COMPUTER PORT
Lets you select between MAGNI SDM, CONTROL/LOGBOOK, MEMORY I/O, REPORT, or NOT
USED.
If a computer is connected to your AVM-510A, you can use it to store measurement report files or to
print out measurement reports.